Author Topic: Paragon Chat FAAAQ  (Read 152353 times)

Patch

  • Underling
  • *
  • Posts: 6
Re: Paragon Chat FAAAQ
« Reply #580 on: April 11, 2017, 12:54:31 AM »
Thanks for the tip! I'm trying to run it on a port I thought they kept open, but it's still not working. If I try to use the Broadcast or Request channels, it tells me that the message could not be sent because there was an error joining zone chat.

Running it on port 80 caused the client to get stuck at the "Connecting..." phase, so that's out.

Tahquitz

  • Titan Moderator
  • Elite Boss
  • *****
  • Posts: 1,489
  • To Clear Your View
    • HERC Liaison/Advisor
Re: Paragon Chat FAAAQ
« Reply #581 on: April 11, 2017, 01:24:39 AM »
Depends on what you're trying to test.  If you don't need the Internet and have a host and client system, throw a switch between the two, assign IP Addresses/subnet to the two systems together and create a private network (all the ports are open on your own network, after all. :D

In short, don't uplink to your campus network.
Remember when ranting: always vent your spleen.

How Icon and Paragon Chat Works (by Felderburg) | Bored in Paragon Chat? Start something. | Property of Triumphâ„¢

Patch

  • Underling
  • *
  • Posts: 6
Re: Paragon Chat FAAAQ
« Reply #582 on: April 11, 2017, 01:33:33 AM »
Hah! Well, we had to do something for our project on these VMs... and this has definitely been a learning experience.

Hope isn't lost entirely, I still have a few options left. I'll let you know if I do end up getting it to work. And thanks again for the assistance.  ;)

Patch

  • Underling
  • *
  • Posts: 6
Re: Paragon Chat FAAAQ
« Reply #583 on: April 11, 2017, 08:54:49 PM »
Update: private chat/tells are working. But zone chat and mapmove aren't working. EDIT: mapmove is working, I'm just dumb and used the wrong numbers.



Is there something I need to do to create those channels? Based on what Codewalker said it didn't sound like it, but... Gah! I feel like I'm so close, and yet so far...
« Last Edit: April 11, 2017, 11:45:08 PM by Patch »

slickriptide

  • Elite Boss
  • *****
  • Posts: 303
Re: Paragon Chat FAAAQ
« Reply #584 on: September 14, 2017, 09:11:46 PM »
I'm not sure this is the appropriate thread to post about troubles with Openfire, but since I'm having the identical problem that @Patch was having back in April, and he's the last person to post here...

I deleted my entire installation - Tequila, Paragon Chat, Pidgin, and Openfire; and updated all of it to the current release versions. I have Openfire running on my local Windows 10 workstation. I can access things fine using Pidgin and create rooms and what not.

When Paragon Chat connects, it creates a global connection to the server, but it never connects to the conference instance and so never attempts to connect to the appropriate channels - paragonchat, atlaspark and atlaspark_meta. This same installation of Paragon Chat connects fine to Titan's server.

Likewise, like @Patch, /mapmove works as expected as far as changing environment to the designated map, but no connection to the appropriate chat channels is attempted.

Debug log:
Quote
PCC INFO:  Client is now fully initialized and ready!
xmpp DEBUG sock_connect to magnum.cjhunter.com:5222 returned 1820
xmpp DEBUG attempting to connect to magnum.cjhunter.com
xmpp DEBUG connection successful
conn DEBUG SENT: <?xml version="1.0"?><stream:stream to="magnum.cjhunter.com" xml:lang="en" version="1.0" xmlns="jabber:client" xmlns:stream="http://etherx.jabber.org/streams">
xmpp DEBUG RECV: <stream:stream from='magnum.cjhunter.com' id='6ye0u4jhnm' http://www.w3.org/XML/1998/namespace lang='en' version='1.0'>
xmpp DEBUG RECV: <features xmlns="http://etherx.jabber.org/streams"><starttls xmlns="urn:ietf:params:xml:ns:xmpp-tls"/><mechanisms xmlns="urn:ietf:params:xml:ns:xmpp-sasl"><mechanism>PLAIN</mechanism><mechanism>ANONYMOUS</mechanism><mechanism>SCRAM-SHA-1</mechanism><mechanism>CRAM-MD5</mechanism><mechanism>DIGEST-MD5</mechanism></mechanisms><compression xmlns="http://jabber.org/features/compress"><method>zlib</method></compression><register xmlns="http://jabber.org/features/iq-register"/></features>
conn DEBUG SENT: <starttls xmlns="urn:ietf:params:xml:ns:xmpp-tls"/>
xmpp DEBUG RECV: <proceed xmlns="urn:ietf:params:xml:ns:xmpp-tls"/>
xmpp DEBUG handle proceedtls called for proceed
xmpp DEBUG proceeding with TLS
conn DEBUG SENT: <?xml version="1.0"?><stream:stream to="magnum.cjhunter.com" xml:lang="en" version="1.0" xmlns="jabber:client" xmlns:stream="http://etherx.jabber.org/streams">
xmpp DEBUG RECV: <stream:stream from='magnum.cjhunter.com' id='6ye0u4jhnm' http://www.w3.org/XML/1998/namespace lang='en' version='1.0'>
xmpp DEBUG RECV: <features xmlns="http://etherx.jabber.org/streams"><mechanisms xmlns="urn:ietf:params:xml:ns:xmpp-sasl"><mechanism>PLAIN</mechanism><mechanism>ANONYMOUS</mechanism><mechanism>SCRAM-SHA-1</mechanism><mechanism>CRAM-MD5</mechanism><mechanism>DIGEST-MD5</mechanism></mechanisms><compression xmlns="http://jabber.org/features/compress"><method>zlib</method></compression><register xmlns="http://jabber.org/features/iq-register"/></features>
conn DEBUG SENT: <auth mechanism="SCRAM-SHA-1" xmlns="urn:ietf:params:xml:ns:xmpp-sasl">biwsbj1zbGlja3JpcHRpZGUscj0wdVlFQU03cnVsa0FBQUFB</auth>
xmpp DEBUG RECV: <challenge xmlns="urn:ietf:params:xml:ns:xmpp-sasl">cj0wdVlFQU03cnVsa0FBQUFBMTM5MjEzMTUtYWZmMi00M2FkLTg4YWQtYjg5NTdlNjJhYjNjLHM9Wk9KVzdGT2gzeW5WRFNNSThoTWNaUUJYQTdlUzJmMWEsaT00MDk2</challenge>
xmpp DEBUG handle SCRAM-SHA-1 (challenge) called for challenge
conn DEBUG SENT: <response xmlns="urn:ietf:params:xml:ns:xmpp-sasl">Yz1iaXdzLHI9MHVZRUFNN3J1bGtBQUFBQTEzOTIxMzE1LWFmZjItNDNhZC04OGFkLWI4OTU3ZTYyYWIzYyxwPW5MUXMxaENFRnh5MDc0WDNNV0lHNlpxclErMD0=</response>
xmpp DEBUG RECV: <success xmlns="urn:ietf:params:xml:ns:xmpp-sasl">dj1USXgzQzdDUTlRS3FYVngzYmYyd1V6Y2dJWXM9</success>
xmpp DEBUG handle SCRAM-SHA-1 (challenge) called for success
xmpp DEBUG SASL SCRAM-SHA-1 auth successful
conn DEBUG SENT: <?xml version="1.0"?><stream:stream to="magnum.cjhunter.com" xml:lang="en" version="1.0" xmlns="jabber:client" xmlns:stream="http://etherx.jabber.org/streams">
xmpp DEBUG RECV: <stream:stream from='magnum.cjhunter.com' id='6ye0u4jhnm' http://www.w3.org/XML/1998/namespace lang='en' version='1.0'>
xmpp DEBUG Reopened stream successfully.
xmpp DEBUG RECV: <features xmlns="http://etherx.jabber.org/streams"><compression xmlns="http://jabber.org/features/compress"><method>zlib</method></compression><bind xmlns="urn:ietf:params:xml:ns:xmpp-bind"/><session xmlns="urn:ietf:params:xml:ns:xmpp-session"><optional/></session><sm xmlns="urn:xmpp:sm:2"/><sm xmlns="urn:xmpp:sm:3"/></features>
conn DEBUG SENT: <iq id="_xmpp_bind1" type="set"><bind xmlns="urn:ietf:params:xml:ns:xmpp-bind"><resource>Artiste</resource></bind></iq>
xmpp DEBUG RECV: <iq id="_xmpp_bind1" to="magnum.cjhunter.com/6ye0u4jhnm" type="result"><bind xmlns="urn:ietf:params:xml:ns:xmpp-bind"><jid>slickriptide@magnum.cjhunter.com/Artiste</jid></bind></iq>
xmpp DEBUG Bind successful.
conn DEBUG SENT: <iq id="_xmpp_session1" type="set"><session xmlns="urn:ietf:params:xml:ns:xmpp-session"/></iq>
xmpp DEBUG RECV: <iq id="_xmpp_session1" to="slickriptide@magnum.cjhunter.com/Artiste" type="result"/>
xmpp DEBUG Session establishment successful.
INFO:  XMPP Connected
conn DEBUG SENT: <presence><pc jid="slickriptide@magnum.cjhunter.com/Artiste" xmlns="pc:presence" version="Release-1.0.13" protocol="7"/><character class="Class_Controller" badgetitle="AtlasParkTour3" xmlns="pc:character" oldcostume="p33cj2+wrhaDUq/K5Jw0xXivmow=" map="maps/City_Zones/City_01_01/City_01_01.txt" costume="p33cj2+wrhaDUq/K5Jw0xXivmow=" origin="Science" name="Artiste"/></presence>
conn DEBUG SENT: <iq id="00000002-109e67c7" type="get"><query xmlns="http://jabber.org/protocol/disco#info"/></iq>
conn DEBUG SENT: <iq id="00000003-109e67c7" type="get"><query xmlns="http://jabber.org/protocol/disco#items"/></iq>
conn DEBUG SENT: <iq id="roster_req1" type="get"><query xmlns="jabber:iq:roster"/></iq>
xmpp DEBUG RECV: <iq id="00000002-109e67c7" to="slickriptide@magnum.cjhunter.com/Artiste" type="result"><query xmlns="http://jabber.org/protocol/disco#info"><identity type="registered" category="account"/><identity type="pep" category="pubsub"/><feature var="http://jabber.org/protocol/pubsub#retrieve-default"/><feature var="http://jabber.org/protocol/pubsub#purge-nodes"/><feature var="vcard-temp"/><feature var="http://jabber.org/protocol/pubsub#subscribe"/><feature var="http://jabber.org/protocol/pubsub#subscription-options"/><feature var="http://jabber.org/protocol/pubsub#create-nodes"/><feature var="http://jabber.org/protocol/pubsub#outcast-affiliation"/><feature var="msgoffline"/><feature var="http://jabber.org/protocol/pubsub#get-pending"/><feature var="http://jabber.org/protocol/pubsub#multi-subscribe"/><feature var="http://jabber.org/protocol/pubsub#presence-notifications"/><feature var="urn:xmpp:ping"/><feature var="jabber:iq:register"/><feature var="http://jabber.org/protocol/pubsub#delete-nodes"/><feature var="http://jabber.org/protocol/pubsub#config-node"/><feature var="http://jabber.org/protocol/pubsub#retrieve-items"/><feature var="http://jabber.org/protocol/pubsub#auto-create"/><feature var="http://jabber.org/protocol/disco#items"/><feature var="http://jabber.org/protocol/pubsub#item-ids"/><feature var="http://jabber.org/protocol/pubsub#meta-data"/><feature var="jabber:iq:roster"/><feature var="http://jabber.org/protocol/pubsub#instant-nodes"/><feature var="http://jabber.org/protocol/pubsub#modify-affiliations"/><feature var="http://jabber.org/protocol/pubsub#persistent-items"/><feature var="http://jabber.org/protocol/pubsub#create-and-configure"/><feature var="http://jabber.org/protocol/pubsub"/><feature var="http://jabber.org/protocol/pubsub#publisher-affiliation"/><feature var="http://jabber.org/protocol/pubsub#access-open"/><feature var="http://jabber.org/protocol/pubsub#retrieve-affiliations"/><feature var="jabber:iq:version"/><feature var="http://jabber.org/protocol/pubsub#retract-items"/><feature var="urn:xmpp:time"/><feature var="http://jabber.org/protocol/pubsub#manage-subscriptions"/><feature var="jabber:iq:privacy"/><feature var="jabber:iq:last"/><feature var="http://jabber.org/protocol/commands"/><feature var="http://jabber.org/protocol/offline"/><feature var="urn:xmpp:carbons:2"/><feature var="http://jabber.org/protocol/address"/><feature var="http://jabber.org/protocol/pubsub#publish"/><feature var="http://jabber.org/protocol/pubsub#collections"/><feature var="http://jabber.org/protocol/pubsub#retrieve-subscriptions"/><feature var="http://jabber.org/protocol/disco#info"/><feature var="jabber:iq:private"/><feature var="http://jabber.org/protocol/rsm"/></query></iq>
conn DEBUG SENT: <iq id="00000004-109e67c7" type="get"><time xmlns="urn:xmpp:time"/></iq>
conn DEBUG SENT: <iq id="00000005-109e67c7" type="get"><query xmlns="jabber:iq:privacy"/></iq>
xmpp DEBUG RECV: <iq id="00000003-109e67c7" to="slickriptide@magnum.cjhunter.com/Artiste" type="error"><query xmlns="http://jabber.org/protocol/disco#items"/><error code="404" type="cancel"><item-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/></error></iq>
xmpp DEBUG RECV: <iq id="roster_req1" to="slickriptide@magnum.cjhunter.com/Artiste" type="result"><query xmlns="jabber:iq:roster"/></iq>
xmpp DEBUG RECV: <iq id="00000004-109e67c7" to="slickriptide@magnum.cjhunter.com/Artiste" type="result"><time xmlns="urn:xmpp:time"><tzo>-07:00</tzo><utc>2017-09-14T20:51:27.013Z</utc></time></iq>
xmpp DEBUG RECV: <iq id="00000005-109e67c7" to="slickriptide@magnum.cjhunter.com/Artiste" type="result"><query xmlns="jabber:iq:privacy"/></iq>
DEBUG: Unhandled cmd_num 97
xmpp DEBUG RECV: <iq id="777-12" to="slickriptide@magnum.cjhunter.com/Artiste" type="get" from="magnum.cjhunter.com"><ping xmlns="urn:xmpp:ping"/></iq>
conn DEBUG SENT: <iq id="777-12" to="magnum.cjhunter.com" type="result"/>
conn DEBUG SENT: <presence><pc jid="slickriptide@magnum.cjhunter.com/Artiste" xmlns="pc:presence" version="Release-1.0.13" protocol="7"/><character class="Class_Controller" badgetitle="AtlasParkTour3" xmlns="pc:character" oldcostume="p33cj2+wrhaDUq/K5Jw0xXivmow=" map="maps/City_Zones/City_03_04/City_03_04.txt" costume="p33cj2+wrhaDUq/K5Jw0xXivmow=" origin="Science" name="Artiste"/></presence>
xmpp DEBUG RECV: <presence to="slickriptide@magnum.cjhunter.com/Artiste" from="slickriptide@magnum.cjhunter.com/Artiste"><pc jid="slickriptide@magnum.cjhunter.com/Artiste" xmlns="pc:presence" protocol="7" version="Release-1.0.13"/><character class="Class_Controller" xmlns="pc:character" badgetitle="AtlasParkTour3" map="maps/City_Zones/City_03_04/City_03_04.txt" oldcostume="p33cj2+wrhaDUq/K5Jw0xXivmow=" name="Artiste" origin="Science" costume="p33cj2+wrhaDUq/K5Jw0xXivmow="/></presence>
DEBUG: Unhandled cmd_num 97


I tried deleting the default conference MUC and even naming the replacement 'paragon', like Titan, to no avail.

Openfire is just a vanilla installation with a single registered user; me. As I mentioned, Pidgin can access things just fine.

Any suggestions?


Codewalker

  • Hero of the City
  • Titan Network Admin
  • Elite Boss
  • *****
  • Posts: 2,704
  • Moar Dots!
Re: Paragon Chat FAAAQ
« Reply #585 on: September 15, 2017, 03:26:54 AM »
It looks like discovery is broken somehow.

This is the important part:

Quote
conn DEBUG SENT: <iq id="00000003-109e67c7" type="get"><query xmlns="http://jabber.org/protocol/disco#items"/></iq>

xmpp DEBUG RECV: <iq id="00000003-109e67c7" to="slickriptide@magnum.cjhunter.com/Artiste" type="error"><query xmlns="http://jabber.org/protocol/disco#items"/><error code="404" type="cancel"><item-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/></error></iq>

PC is asking for a list of registered services, and Openfire is replying back saying... not found. So PC can't locate the MUC service. This is what the reply is supposed to look like:

Quote
<iq id="00000003-378f6a8e" to="test1@test.test.org/teamtest1" type="result"><query xmlns="http://jabber.org/protocol/disco#items"><item jid="proxy.test.test.org" name="Socks 5 Bytestreams Proxy"/><item jid="pubsub.test.test.org" name="Publish-Subscribe service"/><item jid="conference.test.test.org" name="Public Chatrooms"/></query></iq>

Then PC would go through the list and query each item to discover which one is the MUC service. Excerpt:

Quote
conn DEBUG SENT: <iq id="00000008-378f6a8e" to="conference.test.test.org" type="get"><query xmlns="http://jabber.org/protocol/disco#info"/></iq>

xmpp DEBUG RECV: <iq id="00000008-378f6a8e" to="test1@test.test.org/teamtest1" type="result" from="conference.test.test.org"><query xmlns="http://jabber.org/protocol/disco#info"><identity type="text" category="conference" name="Public Chatrooms"/><identity type="chatroom" category="directory" name="Public Chatroom Search"/><feature var="http://jabber.org/protocol/muc"/><feature var="http://jabber.org/protocol/disco#info"/><feature var="http://jabber.org/protocol/disco#items"/><feature var="jabber:iq:search"/><feature var="http://jabber.org/protocol/rsm"/></query></iq>

But for whatever reason your Openfire install is saying there aren't any services available. That doesn't look right; pubsub is built in so that should at least be listed. Is Pidgin able to see the MUC service / any rooms?

slickriptide

  • Elite Boss
  • *****
  • Posts: 303
Re: Paragon Chat FAAAQ
« Reply #586 on: September 15, 2017, 05:16:56 PM »
Pidgin and Spark both work. It's a strange thing.

Stranger yet - Installing the Linux version created identical results. The debug log looks nearly identical, other than the host names. Either it's a bug in the current version of Openfire, or it's some obscure firewall/network interference.

Since I'm the sysadmin here and have direct control over the firewall and network, I'm skeptical about the firewall option though I can't entirely rule it out given that it would by definition be something I was unaware of.

It's unfortunate the every other xmpp server out there seems to be a pain-in-the-backside to install and configure. :-/

*****EDIT****

Further conversation about this will be moved to the support thread where it belongs. I expect to make a post there shortly.



I guess what I'll do next is get everything downloaded again on to a fresh machine  on my home network and see if that works as expected.



« Last Edit: September 15, 2017, 06:05:03 PM by slickriptide »

Backneedle

  • Tomorrow's Hero 2017
  • Underling
  • *
  • Posts: 5
  • 12 Year Vet.
Re: Paragon Chat FAAAQ
« Reply #587 on: August 11, 2018, 07:55:51 AM »
Help I don't know where to put this
Ever since yesterday when i clicked on paragon chat to launch it
when i tried to launch it i got an error message saying that it was missing something
I tried repairing it uninstalling it and trying to re install it please someone help me get my paragon chat back up and running!! :'( :'(  :'( :'(

Tahquitz

  • Titan Moderator
  • Elite Boss
  • *****
  • Posts: 1,489
  • To Clear Your View
    • HERC Liaison/Advisor
Re: Paragon Chat FAAAQ
« Reply #588 on: August 11, 2018, 06:19:40 PM »
Help I don't know where to put this
Ever since yesterday when i clicked on paragon chat to launch it
when i tried to launch it i got an error message saying that it was missing something
I tried repairing it uninstalling it and trying to re install it please someone help me get my paragon chat back up and running!! :'( :'(  :'( :'(

Post it in here as a new topic.  We'd also need a specific error message... (What does it say it's missing?)
Remember when ranting: always vent your spleen.

How Icon and Paragon Chat Works (by Felderburg) | Bored in Paragon Chat? Start something. | Property of Triumphâ„¢

Tolrick

  • Underling
  • *
  • Posts: 6
Re: Paragon Chat FAAAQ
« Reply #589 on: September 13, 2018, 11:43:37 PM »
Got a new computer recently, and it obviously does not have the 2012 last updated CoH client on it....

Unsure what to do at this point.  I recall helping a few friends get their systems set up, but that was 4 years ago already.
@Tolrick; Virtue Server

Shade Girl, Eternal Youth, Lion of England, and too many others to name

Ohioknight

  • Celebrating Columbus Day
  • Elite Boss
  • *****
  • Posts: 699
  • 62 years old
Re: Paragon Chat FAAAQ
« Reply #590 on: September 15, 2018, 09:15:16 PM »
Got a new computer recently, and it obviously does not have the 2012 last updated CoH client on it....

Unsure what to do at this point.  I recall helping a few friends get their systems set up, but that was 4 years ago already.

I seem to recall that Tequila is not endorsed by Titan Network because running it would access and download a new copy of the free issue 24 beta to a computer if it didn't already have a copy as well as updating things -- and if you do that you might be not abiding by NC soft distribution rules
"Wow, a fat, sarcastic, Star Trek fan, you must be a devil with the ladies"

Nyghtshade

  • HERC Representative
  • Elite Boss
  • *
  • Posts: 790
Re: Paragon Chat FAAAQ
« Reply #591 on: September 16, 2018, 01:39:36 PM »
Also, when downloading from scratch via Tequila, it does take A Really Really Long Time to get ALL the files reloaded - so be patient. 

The downloads will complete probably about an hour after you've decided "it's taking way too long, something must be wrong".  :D

Tahquitz

  • Titan Moderator
  • Elite Boss
  • *****
  • Posts: 1,489
  • To Clear Your View
    • HERC Liaison/Advisor
Re: Paragon Chat FAAAQ
« Reply #592 on: September 19, 2018, 02:26:34 PM »
I seem to recall that Tequila is not endorsed by Titan Network because running it would access and download a new copy of the free issue 24 beta to a computer if it didn't already have a copy as well as updating things -- and if you do that you might be not abiding by NC soft distribution rules

Tequila is not a Titan Network project, it belongs to SaveCOH.com.  But we've told users to use the client to get the files, so if we didn't endorse it, we're doing a lousy job.

We make it clear that we don't run Tequila to manage support expectations.  Codewalker, TonyV and Sekoia are the wrong folks to ask to fix it.  That's all.

You can get it here.
Remember when ranting: always vent your spleen.

How Icon and Paragon Chat Works (by Felderburg) | Bored in Paragon Chat? Start something. | Property of Triumphâ„¢